Dave Smith Instruments Prophet 12 Información técnica descargar pdf (Pagina 87)

Tempest Operation Manual

Support

Troubleshooting

Here are a few suggestions for resolving problems that may occur.

The sequencer has stopped running.

Make sure MIDI: Clock Mode in the System menu is set to Auto, Master,

or Off, or—if set to Slave—that MIDI: Clock In is set to MIDI Port or USB

and that MIDI clock is actually available to that port.

An oscillator or lter sounds strange or out of tune.

In the System menu, choose Calibrate Analog Oscillators and Filters.

Note: It is not necessary to run the calibration routine on a regular basis.

You should only run it if you are experiencing problems.

The Real Time FX sliders are not behaving as expected or don’t

seem to go full range.

menu, choose Calibrate Slider 1 and Slider 2 Position and

follow the inst

Still experiencing a problem?

From the System menu, choose Reset System Parameters.

Contacting Technical Support

If you are still having a problem with Tempest, contact Technical Support at

[email protected]. Please include your Tempest’s serial

number, the versions of the operating systems (from the System menu, choose

Show System Information), and the purchase date.

Note: If you have not already reset the Global parameters and run the

calibration routine (see “Troubleshooting,” above), you should do it before

contacting Technical Support. It’s probably the rst thing they’ll ask you to

do.

1 2 ... 82 83 84 85 86 87 88 89 90

Sin comentarios

Dave Smith Instruments Prophet 12 Información técnica Pagina 87